Three great products for the Harley-Davidson Pan America - bundled together for great savings!
Note: These are all compatible with each other. The Display Riser and GPS/Phone Mount require the Adjustable Windshield System.
Adjustable Windshield System
Our new system is so well integrated with the bike, you will think it came from the factory that way. It is one of our most involved bracket kits (see photos) because it bolts to the steel frame and holds the instrument panel as well as the windshield. When installed, you can actually pull your bike around by the windshield, but our patented mechanism still lets you easily adjust height and angle without tools. Only a few simple hand tools are needed to install, and you will NOT need to modify the bike in any way. This kit includes:
- The Madstad adjustable frame-mount bracket system
- Acrylic touring windshield
- All required mounting hardware
Installation Video:
Display Riser
This add-on accessory pairs with Madstad adjustable windshield system allowing for improved visibility by raising the instrument display higher and solves the problem of the low factory display position. With a much greater tilt range, you can pivot the display back to standing angle for the most direct and clear view possible under all of your riding positions.
• Raises instrument display 2 full inches, allowing a clear line of sight to safely view the road ahead AND your display screen
• Ideal when using a tank bag or handlebar risers
• Easy installation to the Madstad adjustable windshield system
• Includes plug & play display wiring harness extension
• Powder coated stainless steel components
• Will not work with OEM windshield
• Made in the USA
Phone Mount Crossbar
This add-on accessory for the Madstad adjustable windshield system allows you to attach your phone where it MUCH easier to see, just below your line of sight. Instead of bobbing your head up and down to see your smartphone screen, you simply lower your gaze a few inches and there it is. Keep your eyes on the road, and your critical information front and center.
Note: Phone mount in photo not included.
The stainless steel bar brackets mount directly to the metal Madstad windshield system so you get the most solid mounting possible. The bar itself is solid 7/8" thick aluminum and will not rotate so that whatever you mount there stays in place. Mount up to two devices side-by-side, and you can use this crossbar whether or not you have purchased our Display Riser Kit.
Three great products for the Harley-Davidson Pan America - bundled together for great savings!
Note: These are all compatible with each other. The Display Riser and GPS/Phone Mount require the Adjustable Windshield System.
Adjustable Windshield System
Our new system is so well integrated with the bike, you will think it came from the factory that way. It is one of our most involved bracket kits (see photos) because it bolts to the steel frame and holds the instrument panel as well as the windshield. When installed, you can actually pull your bike around by the windshield, but our patented mechanism still lets you easily adjust height and angle without tools. Only a few simple hand tools are needed to install, and you will NOT need to modify the bike in any way. This kit includes:
- The Madstad adjustable frame-mount bracket system
- Acrylic touring windshield
- All required mounting hardware
Installation Video:
Display Riser
This add-on accessory pairs with Madstad adjustable windshield system allowing for improved visibility by raising the instrument display higher and solves the problem of the low factory display position. With a much greater tilt range, you can pivot the display back to standing angle for the most direct and clear view possible under all of your riding positions.
• Raises instrument display 2 full inches, allowing a clear line of sight to safely view the road ahead AND your display screen
• Ideal when using a tank bag or handlebar risers
• Easy installation to the Madstad adjustable windshield system
• Includes plug & play display wiring harness extension
• Powder coated stainless steel components
• Will not work with OEM windshield
• Made in the USA
Phone Mount Crossbar
This add-on accessory for the Madstad adjustable windshield system allows you to attach your phone where it MUCH easier to see, just below your line of sight. Instead of bobbing your head up and down to see your smartphone screen, you simply lower your gaze a few inches and there it is. Keep your eyes on the road, and your critical information front and center.
Note: Phone mount in photo not included.
The stainless steel bar brackets mount directly to the metal Madstad windshield system so you get the most solid mounting possible. The bar itself is solid 7/8" thick aluminum and will not rotate so that whatever you mount there stays in place. Mount up to two devices side-by-side, and you can use this crossbar whether or not you have purchased our Display Riser Kit.
THE MOST COMFORTABLE WIND PROTECTION A MOTORCYCLE CAN HAVE
Customer Reviews
Based on 417 reviews
79%
(328)
12%
(51)
4%
(17)
3%
(11)
2%
(10)
F
Great customer service and fast shipping. They had mine in stock or made is lightning fast because I got it in two days (florida to florida). You have to play with the height and tilt to get best results. The windshield is very clear and all the parts are high quality. Installation took me maybe about an hour or two and I'm not a very skilled technical person. I took my bike for about 10 runs and found a perfect height and tilt for me where it eliminates the turbulance above 50mph caused by the stock windshield. you still get wind, maybe more wind but it's smooth so your helmet isnt bobbling around. I got the 12" version.
M
I haven't installed the side deflectors yet. The top longer screws included are not the correct thread so I'll head to the hardware store to see if I can match up something.
Update: Even though I ordered the wrong year, Madstad called and they are sending the correct hardware pack to me. They are a stand-up company and great products.
D
Received the windshield ot was nicely packaged all the parts were wrapped and protected. It was incredibly easy to install four screws secure the old windshield new bracket attaches at those same screws put it on and was riding in less than 10 min. Adjusts easily and works perfectly. Very happy with my purchase.
W
I just purchased my second MedStad windshield system and I have to say I'm disappointed I have a 2015 and a 2013 victory cross country The first One shield I ordered I ordered without the cutout on the bottom but now that's no longer an option. I don't understand why that's not an option when the windshield sets a couple inches off the fairing of the motorcycle I would much rather have that cut out on the bottom of the windshield filled in like the first windshield that I bought I would think it would be easier not to cut that cut out out from the factory. I don't understand why this is not an option anymore. I love the system itself but I don't care for the look of the new windshields with the cut out on the bottom. Again it doesn't make sense when the windshield sits and itch or so off the fairing I would rather my windshield come down to a nice sleak point that they used to offer.
J
Look no further.. this will solve all your concerns. Had the brackets on previous
Had bikes and they were outstanding...this one is even better