Three great products for KTM 790 / 890 Adventure / R (2019 - 2022) - bundled together for great savings!
Adjustable Windshield System for KTM 890 / 790 Adventure / R (2019 - 2022)
Our complete drop-in system is custom-made for your bike and includes:
-
Adjustable bracket system
-
Acrylic windshield (18" in photo)
-
Installation hardware
-
All required mounting hardware
Your bike will not require any modification and our system does not interfere with any factory accessories. You will not be able to use your stock shield, it is not compatible with the Madstad system and is too small to provide proper wind protection. We've created a wider shield to give you better wind protection around your body but without getting in the way of your hand guards at full lock. Our bracket system attaches where the factory shield mounts and allows you to dial in the best height and angle to give you smooth airflow over your helmet while still allowing you to see over the top of the shield.
All Madstad windshields are made from 3/16" (4.5 mm) thick cast acrylic.
Kickstand Shoe for KTM 790 Adventure
This aluminum kickstand shoe and extension helps prevent tip-overs and sinking into soft ground. It is much wider than the factory kickstand bottom but particularly extends outward to give your bike great support against tip-overs. It fully clears the body when in the up position and has a textured bottom surface for extra grip. The base is aluminum and has a drain hole in the main cavity. The top plate and screws are stainless steel and an installation wrench is included. This shoe is a very tight fit and won't budge once installed. Every KTM 790 should have one. Made in the USA.
Tail Rack for KTM 390 / 790 / 890 Adventure and Adventure R (2020 - 2022)
Rack Dimensions: Top surface area: 15" at widest, 12.5" at narrowest.
Attaching gear to the tail of your bike is hard without a wide base that has lots of hook points for bungee cords. The MadStad tail rack provides just that with a thick 3/16" aluminum structure, 13 strap holes and 78 hook points for just about anything you are trying to strap down! Our tail rack attaches either on top of the factory plate and grab handles, or in place of the factory plastic in case those grab handles are in the way. Hardware is included for both configurations and the top surface is flat so you can set oversized packs on it. Every KTM 790 Adventure should have one! Made in the USA.
Available in powder coated Black or Raw Aluminum Silver finish.
Three great products for KTM 790 / 890 Adventure / R (2019 - 2022) - bundled together for great savings!
Adjustable Windshield System for KTM 890 / 790 Adventure / R (2019 - 2022)
Our complete drop-in system is custom-made for your bike and includes:
-
Adjustable bracket system
-
Acrylic windshield (18" in photo)
-
Installation hardware
-
All required mounting hardware
Your bike will not require any modification and our system does not interfere with any factory accessories. You will not be able to use your stock shield, it is not compatible with the Madstad system and is too small to provide proper wind protection. We've created a wider shield to give you better wind protection around your body but without getting in the way of your hand guards at full lock. Our bracket system attaches where the factory shield mounts and allows you to dial in the best height and angle to give you smooth airflow over your helmet while still allowing you to see over the top of the shield.
All Madstad windshields are made from 3/16" (4.5 mm) thick cast acrylic.
Kickstand Shoe for KTM 790 Adventure
This aluminum kickstand shoe and extension helps prevent tip-overs and sinking into soft ground. It is much wider than the factory kickstand bottom but particularly extends outward to give your bike great support against tip-overs. It fully clears the body when in the up position and has a textured bottom surface for extra grip. The base is aluminum and has a drain hole in the main cavity. The top plate and screws are stainless steel and an installation wrench is included. This shoe is a very tight fit and won't budge once installed. Every KTM 790 should have one. Made in the USA.
Tail Rack for KTM 390 / 790 / 890 Adventure and Adventure R (2020 - 2022)
Rack Dimensions: Top surface area: 15" at widest, 12.5" at narrowest.
Attaching gear to the tail of your bike is hard without a wide base that has lots of hook points for bungee cords. The MadStad tail rack provides just that with a thick 3/16" aluminum structure, 13 strap holes and 78 hook points for just about anything you are trying to strap down! Our tail rack attaches either on top of the factory plate and grab handles, or in place of the factory plastic in case those grab handles are in the way. Hardware is included for both configurations and the top surface is flat so you can set oversized packs on it. Every KTM 790 Adventure should have one! Made in the USA.
Available in powder coated Black or Raw Aluminum Silver finish.
THE MOST COMFORTABLE WIND PROTECTION A MOTORCYCLE CAN HAVE
Customer Reviews
Based on 409 reviews
79%
(323)
12%
(49)
4%
(16)
3%
(11)
2%
(10)
S
Ordering was very easy knowing exactly what we wanted and needed was very clear cost was reasonable and shipping and communication was perfect saved them in my favorites
E
Installed the 16 inch on my 2008 Goldwing everything is set at its lowest level. I see over about 2 inches over the top and absolutely no buffering at all for me or my wife. I do get air flowing past me, but it’s smooth clean air. My wife and I went out yesterday for about 100 mile ride maybe a little more than that and most of the way I was between 65 and 70 never lowered the shield on my helmet. No need for it with this windshield. Highly recommend.
D
I have tried several name brand windshields trying to stop wind buffeting nothing work. I was skeptical at first about your shield because of past failures. But this shield works, it has completely stop the buffeting even running the interstate at 80 mph. Thanks satisfied customer
L
The product works fairly well on my triumph 1200 speedster .. can’t get the angle of the wind screen to totally eliminate the wind entirely .. but that ok … biggest beef are the install instructions are terrible .. IKEA gives better step by step instructions.. there is not even a complete close up photo of what the unit should look like when done … I went on line and watched a gentleman who installed a wind shield on his Bonneville , and that helped .
Thanks for leaving your review Leam. We're glad that you're finding improvment over stock. Keep in mind there's also height adjustment which could help even more. We're wondering if you were looking at a different installation manual. The one we link to with the kit has many colored photos of each step and one with the system mounted. But we'll work on getting a video out of our own to help others. Please contact us at support@madstad if you have any questions.
Madstad Support
J
No problem instructions with shield. Found online but Impossible to read on phone. Must modify existing to accept by removing sleeve and circlip making it easy to loose factory parts and hard to put back as assembled by BMW
Would not recommend
Thank you for leaving your review James. We're sorry that you had trouble viewing the instructions. We make a poing to combine text and clear color photos, but understand it can still be a challange. You likely have already installed, but if you have any remaining questions please contact us at support@madstad.com.
Madstad Support Team