Three great products for KTM 790 / 890 Adventure / R (2019 - 2022) - bundled together for great savings!
Adjustable Windshield System for KTM 890 / 790 Adventure / R (2019 - 2022)
Our complete drop-in system is custom-made for your bike and includes:
-
Adjustable bracket system
-
Acrylic windshield (18" in photo)
-
Installation hardware
-
All required mounting hardware
Your bike will not require any modification and our system does not interfere with any factory accessories. You will not be able to use your stock shield, it is not compatible with the Madstad system and is too small to provide proper wind protection. We've created a wider shield to give you better wind protection around your body but without getting in the way of your hand guards at full lock. Our bracket system attaches where the factory shield mounts and allows you to dial in the best height and angle to give you smooth airflow over your helmet while still allowing you to see over the top of the shield.
All Madstad windshields are made from 3/16" (4.5 mm) thick cast acrylic.
Kickstand Shoe for KTM 790 Adventure
This aluminum kickstand shoe and extension helps prevent tip-overs and sinking into soft ground. It is much wider than the factory kickstand bottom but particularly extends outward to give your bike great support against tip-overs. It fully clears the body when in the up position and has a textured bottom surface for extra grip. The base is aluminum and has a drain hole in the main cavity. The top plate and screws are stainless steel and an installation wrench is included. This shoe is a very tight fit and won't budge once installed. Every KTM 790 should have one. Made in the USA.
Tail Rack for KTM 390 / 790 / 890 Adventure and Adventure R (2020 - 2022)
Rack Dimensions: Top surface area: 15" at widest, 12.5" at narrowest.
Attaching gear to the tail of your bike is hard without a wide base that has lots of hook points for bungee cords. The MadStad tail rack provides just that with a thick 3/16" aluminum structure, 13 strap holes and 78 hook points for just about anything you are trying to strap down! Our tail rack attaches either on top of the factory plate and grab handles, or in place of the factory plastic in case those grab handles are in the way. Hardware is included for both configurations and the top surface is flat so you can set oversized packs on it. Every KTM 790 Adventure should have one! Made in the USA.
Available in powder coated Black or Raw Aluminum Silver finish.
Three great products for KTM 790 / 890 Adventure / R (2019 - 2022) - bundled together for great savings!
Adjustable Windshield System for KTM 890 / 790 Adventure / R (2019 - 2022)
Our complete drop-in system is custom-made for your bike and includes:
-
Adjustable bracket system
-
Acrylic windshield (18" in photo)
-
Installation hardware
-
All required mounting hardware
Your bike will not require any modification and our system does not interfere with any factory accessories. You will not be able to use your stock shield, it is not compatible with the Madstad system and is too small to provide proper wind protection. We've created a wider shield to give you better wind protection around your body but without getting in the way of your hand guards at full lock. Our bracket system attaches where the factory shield mounts and allows you to dial in the best height and angle to give you smooth airflow over your helmet while still allowing you to see over the top of the shield.
All Madstad windshields are made from 3/16" (4.5 mm) thick cast acrylic.
Kickstand Shoe for KTM 790 Adventure
This aluminum kickstand shoe and extension helps prevent tip-overs and sinking into soft ground. It is much wider than the factory kickstand bottom but particularly extends outward to give your bike great support against tip-overs. It fully clears the body when in the up position and has a textured bottom surface for extra grip. The base is aluminum and has a drain hole in the main cavity. The top plate and screws are stainless steel and an installation wrench is included. This shoe is a very tight fit and won't budge once installed. Every KTM 790 should have one. Made in the USA.
Tail Rack for KTM 390 / 790 / 890 Adventure and Adventure R (2020 - 2022)
Rack Dimensions: Top surface area: 15" at widest, 12.5" at narrowest.
Attaching gear to the tail of your bike is hard without a wide base that has lots of hook points for bungee cords. The MadStad tail rack provides just that with a thick 3/16" aluminum structure, 13 strap holes and 78 hook points for just about anything you are trying to strap down! Our tail rack attaches either on top of the factory plate and grab handles, or in place of the factory plastic in case those grab handles are in the way. Hardware is included for both configurations and the top surface is flat so you can set oversized packs on it. Every KTM 790 Adventure should have one! Made in the USA.
Available in powder coated Black or Raw Aluminum Silver finish.
THE MOST COMFORTABLE WIND PROTECTION A MOTORCYCLE CAN HAVE
Customer Reviews
Based on 384 reviews
80%
(307)
12%
(45)
4%
(15)
3%
(10)
2%
(7)
N
The windshield fixed my wind buffetting issues! I'm riding comfortably :) It looks good and functions great. The only knock I would give is poor instructions. I had to do a little head scratching but was able to figure out I needed to completely disassemble the brackets to get them in the correct alignment for installation (which the instructions suggest not to do - wasn't going to work the way it came!).
Overall - satisfied. If I need another windshield I'll come to MadStad. Thanks !
Thanks for leaving your review Neal. Awesome to hear the Madstad solved your buffetting and you're finding a comfortable airflow. We also appreciate you figuring out the brackets for installation and apologize the instructions were not super helpful. We'll add some clarity to the manual. If you still have any questions or need anything, we're at support@madstad.com.
Ride On,
Madstad Support
d
The Harley Panamerica certainly has it's faults but with the Madstad winshield buffeting and wind noise on the highway are not among them. The Pan is a great stable highway bike and the relative calm the Madstad provides makes me want to ride more. I am very sensitive to buffeting and this is probably the best protection outside of a full touring bike. I am 6 feet tall with a 32 inch inseam with the seat in the high position. The 20 inch shield was not quite tall enough so ordered the 22 inch. I got the whole package of shield, display riser and gps bar. Not cheap but love all of it. My only complaint is that printed instructions in color should be included. I have noticed other companies are going cheap and relying on online instructions and making you print them out. Not acceptable! Also installing all three products at once requires diverging slightly from the directions for installing each product seperatly. I eventually figured it out with help from Madstad but they need to include printed directions for installing all three at once. With that said, spend the money and buy the package. Quality stuff as always.
We appreciate you for taking the time to leave this review, Douglas. We're very glad that you're able to dial in clean airflow and that you find the quality is to your standards. We also appreciate and understand the feedback regarding instructions.
Thank you - Madstad Support Team
M
This is a very nice system and I think it's the best for this bike. Easy install and adjustable up-down -tilt to get it just right. Also quickly removable.
R
Good shield, it works well, but it's a bit wobbly. Cross bracing would do it wonders, thankfully, I'm an engineer/fabricator and will fab something up.
Thanks for leaving your review Robbie. We're super glad to know it's working well for you.
Naturally there will be some movement with wind forces, but this should not be excessive. As a suggestion, take a second look at the knobs. They can take a moment to get used to. If the coned portion of the knob is not fully seated into the scalloped portion of the upper bracket, then there can be some undesired play. This can happen despite the knobs appearing tight.
If this is the case, the solution is to back the knobs off a bit and then lightly wiggle the windshield while tightening the knobs. This will help them fall correctly into the brackets.
Please contact us at support@madstad.com if you are unable to resolve the movement.
J
Fitment instructions could have been a bit better or at least better illustrated. The screen itself wasn't hard to install but the detachable brackets were a bit confusing how they worked. A bit of trial and error solved the riddle. As far as the wind protection it's near perfect. At highway speeds the wind pressure is negligible on my chest and there is no helmet buffeting at all. On some screens the redirection of air pressure sometimes gets shifted to the helmet and there is a fiddling period to optimize the result. This unit bolts up and works fantastic as is. It has to since no adjustability is available, or needed. While it might seem that 5 stars isn't warranted based on my mechanical aptitude the fact that it's a brilliant piece of kit makes up for my shortcomings.
Thanks for leaving your review John. We appreciate the feedback regarding the instructions and will see what we can do to improve them. Glad that you were able to get familiar with the height and angle adjusters and were able to find a smoother airflow setting. Looks like you did a nice job of installing, thanks for the photos. Enjoy and we're here if you need any support down the road.
Madstad Support