madstad-windsheild-slider-1 madstad-windsheild-slider-1 KTM 790/890/R 3-in-1 Madstad Bundle

Your cart

Your cart is empty

Check out these collections.

Motorcycles
Slingshot
Replacement Parts for Madstad Products
Rider Accessories
Moto Wall Art
0
Days
0
Hours
0
Minutes
0
Seconds

Save 10% on Smoother Rides

Join our community to save 10% on your first order and stay up-to-date on Madstad news and special offers.

By completing this form, you are signing up to receive our emails and can unsubscribe at any time

KTM Bundle for 790 / 890 Adventure / R (2019 - 2022)
KTM Bundle for 790 / 890 Adventure / R (2019 - 2022)
KTM Bundle for 790 / 890 Adventure / R (2019 - 2022)
KTM Bundle for 790 / 890 Adventure / R (2019 - 2022)
KTM Bundle for 790 / 890 Adventure / R (2019 - 2022)
KTM Bundle for 790 / 890 Adventure / R (2019 - 2022)
KTM Bundle for 790 / 890 Adventure / R (2019 - 2022)
KTM Bundle for 790 / 890 Adventure / R (2019 - 2022)
KTM Bundle for 790 / 890 Adventure / R (2019 - 2022)
KTM Bundle for 790 / 890 Adventure / R (2019 - 2022)
KTM Bundle for 790 / 890 Adventure / R (2019 - 2022)
KTM Bundle for 790 / 890 Adventure / R (2019 - 2022)
KTM Bundle for 790 / 890 Adventure / R (2019 - 2022)
KTM Bundle for 790 / 890 Adventure / R (2019 - 2022)
KTM Bundle for 790 / 890 Adventure / R (2019 - 2022)

Three great products for KTM 790 / 890 Adventure / R (2019 - 2022) - bundled together for great savings! 

Adjustable Windshield System for KTM 890 / 790 Adventure / R (2019 - 2022)

Our complete drop-in system is custom-made for your bike and includes:  

  • Adjustable bracket system

  • Acrylic windshield (18" in photo)

  • Installation hardware

  • All required mounting hardware 

Your bike will not require any modification and our system does not interfere with any factory accessories. You will not be able to use your stock shield, it is not compatible with the Madstad system and is too small to provide proper wind protection. We've created a wider shield to give you better wind protection around your body but without getting in the way of your hand guards at full lock. Our bracket system attaches where the factory shield mounts and allows you to dial in the best height and angle to give you smooth airflow over your helmet while still allowing you to see over the top of the shield.

All Madstad windshields are made from 3/16" (4.5 mm) thick cast acrylic.

Kickstand Shoe for KTM 790 Adventure
 
This aluminum kickstand shoe and extension helps prevent tip-overs and sinking into soft ground. It is much wider than the factory kickstand bottom but particularly extends outward to give your bike great support against tip-overs. It fully clears the body when in the up position and has a textured bottom surface for extra grip. The base is aluminum and has a drain hole in the main cavity. The top plate and screws are stainless steel and an installation wrench is included. This shoe is a very tight fit and won't budge once installed. Every KTM 790 should have one.  Made in the USA.

Tail Rack for KTM 390 / 790 / 890 Adventure and Adventure R (2020 - 2022)

Rack Dimensions: Top surface area: 15" at widest, 12.5" at narrowest.

Attaching gear to the tail of your bike is hard without a wide base that has lots of hook points for bungee cords. The MadStad tail rack provides just that with a thick 3/16" aluminum structure, 13 strap holes and 78 hook points for just about anything you are trying to strap down! Our tail rack attaches either on top of the factory plate and grab handles, or in place of the factory plastic in case those grab handles are in the way. Hardware is included for both configurations and the top surface is flat so you can set oversized packs on it. Every KTM 790 Adventure should have one! Made in the USA.

Available in powder coated Black or Raw Aluminum Silver finish.


Availability
 
Sale

KTM Bundle for 790 / 890 Adventure / R (2019 - 2022)

$709.00 $673.00 5% off
Buy With Confidence
Check FAQ For Current Fulfillment Times

Many products are custom made at the time of your order. Please see FAQs for current production times.

(0 in cart)

Three great products for KTM 790 / 890 Adventure / R (2019 - 2022) - bundled together for great savings! 

Adjustable Windshield System for KTM 890 / 790 Adventure / R (2019 - 2022)

Our complete drop-in system is custom-made for your bike and includes:  

  • Adjustable bracket system

  • Acrylic windshield (18" in photo)

  • Installation hardware

  • All required mounting hardware 

Your bike will not require any modification and our system does not interfere with any factory accessories. You will not be able to use your stock shield, it is not compatible with the Madstad system and is too small to provide proper wind protection. We've created a wider shield to give you better wind protection around your body but without getting in the way of your hand guards at full lock. Our bracket system attaches where the factory shield mounts and allows you to dial in the best height and angle to give you smooth airflow over your helmet while still allowing you to see over the top of the shield.

All Madstad windshields are made from 3/16" (4.5 mm) thick cast acrylic.

Kickstand Shoe for KTM 790 Adventure
 
This aluminum kickstand shoe and extension helps prevent tip-overs and sinking into soft ground. It is much wider than the factory kickstand bottom but particularly extends outward to give your bike great support against tip-overs. It fully clears the body when in the up position and has a textured bottom surface for extra grip. The base is aluminum and has a drain hole in the main cavity. The top plate and screws are stainless steel and an installation wrench is included. This shoe is a very tight fit and won't budge once installed. Every KTM 790 should have one.  Made in the USA.

Tail Rack for KTM 390 / 790 / 890 Adventure and Adventure R (2020 - 2022)

Rack Dimensions: Top surface area: 15" at widest, 12.5" at narrowest.

Attaching gear to the tail of your bike is hard without a wide base that has lots of hook points for bungee cords. The MadStad tail rack provides just that with a thick 3/16" aluminum structure, 13 strap holes and 78 hook points for just about anything you are trying to strap down! Our tail rack attaches either on top of the factory plate and grab handles, or in place of the factory plastic in case those grab handles are in the way. Hardware is included for both configurations and the top surface is flat so you can set oversized packs on it. Every KTM 790 Adventure should have one! Made in the USA.

Available in powder coated Black or Raw Aluminum Silver finish.


THE MOST COMFORTABLE WIND PROTECTION A MOTORCYCLE CAN HAVE

Customer Reviews

Based on 448 reviews
78%
(351)
12%
(53)
4%
(20)
3%
(14)
2%
(10)
R
Rotorhd1
No more buffeting!

This is the third windscreen I've tried to reduce the buffeting at highway speeds. The stock windscreen was useless and the Yamaha touring screen, although an improvement, was still allowing more turbulence then I desired. Purchased the Madstad after recommendations from a fellow rider and took advantage of a 20% discount. Immediate improvement! Althoug the screen is unremarkable in its design, (looks like an old Vespa screen), with the winglets installed it prevents buffeting! I am 74 inches tall and sit tall in the saddle. I ordered the tallest screen.

R
RMB
Great Windshield

I installed the adjustable windshield on my wife's Royal Enfield INT650 and she loves it. It was very easy to install and adjust.

I gave it 4-stars because some of the mounting screws were too long. A couple of the holes on the INT650's triple clamps were blind holes, and the bolts supplied bottomed out. I had to get new bolts that were a bit longer than stock, but not as long as the ones in the kit.

R
RB
Kind of works well… when it works

Firstly, I’m not sure why this design made it into production. The screws that hold the adjustment in place simply do not keep the windshield in the set position, no matter how hard I torque them. I can’t imagine this is an impossible problem to solve, and now I’m going to have to DIY one myself.

Speaking of DIY, I was a little bit let down by the wind protection. I measured and I still got a bunch of turbulence on my helmet, and the angle of the screen got in the way of my DMD tablet mounted above the gauge display on my BMW F750GS. I was able to solve both issues by putting a bunch of rubber washers stacked against the upper mounting screws of the windshield, but it’s not ideal. I’ll add that I had the above issue with the adjustment before I added those additional washers, so it’s not a matter of increased wind resistance.

The side deflectors do work quite well, however, keeping wind off my chest, and I really like the OEM+ look.

Thank you for leaving your review.

Here's the troubleshooting steps to keep your knobs tightened:

- The metal coned portion of the knob, which inserts into the bracket, should not be visible at all when properly tightented. This means the black part of the knob will be COMPLETELY flush with the bracket surface - with no space between them.

- You'll notice scalloped or rounded areas on the top part of the brackets. This is where the slightly coned metal portion of the knob must seat into.

- The easiest way to ensure this happens is to slightly wiggle the windshield while tightening the knob. You can check visually to see that it sits into the bracket scalloped slot.

Please contact us if you continue having issue with the knobs.

You may have noticed, but your Madstad F750GS kit includes a plate where you can mount a standard resevoir type ball mount. This allows you to have a custom mounting setup, rising up the back of the factory dispay panel. Other brands can also work, but we offer this complete setup from TackForm mounts: https://madstad.com/collections/motorcycle-mounts/products/tackform-enduro-series-perch-brake-clutch-reservoir-mount-single-ball

We're glad you are finding good results from the side deflectors and that you like the OEM+ look. If you think that the next size taller windshield will help, we have a 45 day period to purchase another size at 50% off (windshield only).

Please contact us at: support@madstad.com for anything.

Thank you - Madstad Support

T
Tim Winder
Great!

Great adjustable windshield and lowers. Always happy with the products and service from madstad.

P
Patrick McCaughey
top rating

I got my madstad windshield and put it on my 2023 honda cb 500f . It was an easy install and to me looks great on my bike,but the best was yet to come! When I got it on the road it was awesome,even befor I made any adjustments to suit my riding.It is strudy and well made and looks like it came on the bike from the factory.It makes riding a pleasure!Great product !!

123