Three great products for the Harley-Davidson Pan America - bundled together for great savings!
Note: These are all compatible with each other. The Display Riser and GPS/Phone Mount require the Adjustable Windshield System.
Adjustable Windshield System
Our new system is so well integrated with the bike, you will think it came from the factory that way. It is one of our most involved bracket kits (see photos) because it bolts to the steel frame and holds the instrument panel as well as the windshield. When installed, you can actually pull your bike around by the windshield, but our patented mechanism still lets you easily adjust height and angle without tools. Only a few simple hand tools are needed to install, and you will NOT need to modify the bike in any way. This kit includes:
- The Madstad adjustable frame-mount bracket system
- Acrylic touring windshield
- All required mounting hardware
Installation Video:
Display Riser
This add-on accessory pairs with Madstad adjustable windshield system allowing for improved visibility by raising the instrument display higher and solves the problem of the low factory display position. With a much greater tilt range, you can pivot the display back to standing angle for the most direct and clear view possible under all of your riding positions.
• Raises instrument display 2 full inches, allowing a clear line of sight to safely view the road ahead AND your display screen
• Ideal when using a tank bag or handlebar risers
• Easy installation to the Madstad adjustable windshield system
• Includes plug & play display wiring harness extension
• Powder coated stainless steel components
• Will not work with OEM windshield
• Made in the USA
Phone Mount Crossbar
This add-on accessory for the Madstad adjustable windshield system allows you to attach your phone where it MUCH easier to see, just below your line of sight. Instead of bobbing your head up and down to see your smartphone screen, you simply lower your gaze a few inches and there it is. Keep your eyes on the road, and your critical information front and center.
Note: Phone mount in photo not included.
The stainless steel bar brackets mount directly to the metal Madstad windshield system so you get the most solid mounting possible. The bar itself is solid 7/8" thick aluminum and will not rotate so that whatever you mount there stays in place. Mount up to two devices side-by-side, and you can use this crossbar whether or not you have purchased our Display Riser Kit.
Three great products for the Harley-Davidson Pan America - bundled together for great savings!
Note: These are all compatible with each other. The Display Riser and GPS/Phone Mount require the Adjustable Windshield System.
Adjustable Windshield System
Our new system is so well integrated with the bike, you will think it came from the factory that way. It is one of our most involved bracket kits (see photos) because it bolts to the steel frame and holds the instrument panel as well as the windshield. When installed, you can actually pull your bike around by the windshield, but our patented mechanism still lets you easily adjust height and angle without tools. Only a few simple hand tools are needed to install, and you will NOT need to modify the bike in any way. This kit includes:
- The Madstad adjustable frame-mount bracket system
- Acrylic touring windshield
- All required mounting hardware
Installation Video:
Display Riser
This add-on accessory pairs with Madstad adjustable windshield system allowing for improved visibility by raising the instrument display higher and solves the problem of the low factory display position. With a much greater tilt range, you can pivot the display back to standing angle for the most direct and clear view possible under all of your riding positions.
• Raises instrument display 2 full inches, allowing a clear line of sight to safely view the road ahead AND your display screen
• Ideal when using a tank bag or handlebar risers
• Easy installation to the Madstad adjustable windshield system
• Includes plug & play display wiring harness extension
• Powder coated stainless steel components
• Will not work with OEM windshield
• Made in the USA
Phone Mount Crossbar
This add-on accessory for the Madstad adjustable windshield system allows you to attach your phone where it MUCH easier to see, just below your line of sight. Instead of bobbing your head up and down to see your smartphone screen, you simply lower your gaze a few inches and there it is. Keep your eyes on the road, and your critical information front and center.
Note: Phone mount in photo not included.
The stainless steel bar brackets mount directly to the metal Madstad windshield system so you get the most solid mounting possible. The bar itself is solid 7/8" thick aluminum and will not rotate so that whatever you mount there stays in place. Mount up to two devices side-by-side, and you can use this crossbar whether or not you have purchased our Display Riser Kit.
THE MOST COMFORTABLE WIND PROTECTION A MOTORCYCLE CAN HAVE
Customer Reviews
Based on 490 reviews
78%
(382)
12%
(58)
5%
(26)
3%
(14)
2%
(10)
J
Nice to have a place that you can reach the staff you need good job, very please with the product, thank you
S
I purchased a 24" windshield and amounting kit for my Pan Am, I think it might be too tall. So I took up Madstad up on the 50% off the second windshield and got a 22" windshield. The one that doesn't work best for the highway will be cut down just enough to clear my iPad mini that I will use for navigation. This short one will be for my offroad adventures. So now I've had this Madstad windshield for a couple months, I have been extremely pleased with this windshield and mounting system, it is soo much more solid than stock. It has zero movement! Though you cannot adjust the windshield on the fly like you can with stock, that does not bother me at all. Once you find the position your windshield works best, why would you move it? If your on the fence about the price of the windshield and mounting system, just suck it up cupcake and get this! I promise you will NOT regret this purchase!
T
I really like the ultimate bumper. It was fairly easy to install and gives more ground clearance. It is also built way more solid then the original bumper. Recommended!
D
I really enjoy Madstad products, this is the 4th product I have purchased from the company. The instructions are clear, the fit and finish are excellent. The only thing that surprised me a little about this windscreen for our 2023 Triumph Bonneville T120 is that it is not a "snug" fit, it has a bit of motion in the screen after it is installed, but it is not noticeable at highway speed.
Thank you for leaving your review. It's great to hear the instructions helped and the fit and finish are to your standards. With the quick-release you are able to tighten the round spools which catch the windshield brackets. Using a #6 Allen and 10mm crescent wrench, you can add some additional tension - compressing the grip of the brackets more. You'll want to find the balance of lowest movement and still be able to take on and off when using the quick release feature. Please be sure to contact us at support@madstad.com for any questions about this.
Thank you
Madstad Support Team
B
I am not overwhelmed by the change from the stock versus this huge windscreen. I’ll try a different helmet and report back.
Thank you for leaving your reply. You may have already, but please spend time experiementing with the various angles. For best results the top edge needs to be somewhere close to mouth level. Please contact us at support@madstad.com if you are not able to adjust that high with your current size.
Thank you
Madstad Support Team