Tenere 700 (2021-up)
Complete MadStad Adjustable Windshield System for your Yamaha Tenere 700 (2021-up)
Transform your ride
MadStad's patented mounting system allows riders to adjust the height and angle of their motorcycle windshield resulting in much smoother airflow, better wind protection and a more comfortable ride than any fixed windshield can provide.
What's included in the kit
Our complete drop-in system is custom-made for your bike and includes everything needed to mount and position the shield. Your bike will not require any modification.
- A set of MadStad adjustable brackets
- The acrylic windshield (18-inch size shown in photos)
Installation is super simple. Our bracket system attaches where the stock shield normally goes and our shield then attaches to the brackets. With the shield separated from the front of the bike you can pull lots of air underneath it which is critical for smooth comfortable wind protection. You still have a fairly compact shield but now the wind pressure on your head and face are gone, and you are still looking comfortably over the shield.
Size and Color
While the MadStad windshield systems are fully adjustable, we recommend starting with the appropriate shield size relative to rider height.
|RIDER HEIGHT||SHIELD SIZE|
|5'8" to 5'11" (173 - 181 cm)||18" (45 cm)|
|6'0" to 6'2" (183 - 190 cm)||20" (50 cm)|
|6'3" and taller (193+ cm)||22" (55 cm)|
These are general recommendations and can vary depending on your inseam, seat height and riding position.
HOW TO MEASURE: Sit on the bike and run a tape measure straight up from the top of the "tank" and look straight ahead at about your mouth level. Take that measurement and add 2 inches and that is the shield size you should order. For example, if your mouth level is at about 16" above the "tank" then that is where the top of our 18 inch windshield will be when in its lowest position. If your mouth level is at 18 inches then order our 20 inch shield, and so on. If you are in-between sizes then round down because our brackets will let you raise the shield another 2 inches. For example, if your mouth level is at about 17 inches then order our 18 inch shield, you will simply use our brackets to raise it up for proper wind protection.
All MadStad windshields are made from 3/16" (4.5 mm) thick cast acrylic and are available in six different tint colors. See photos bar for comparison image.
If you are not 100% satisfied with your purchase return it within 30 days for a full refund. See our return policy details under the FAQ page and buy with confidence.