Complete MadStad Adjustable Windshield System for your Yamaha Super Tenere XT1200Z (2010 - 2013)
Transform your ride
MadStad's patented mounting system allows riders to adjust the height and angle of their motorcycle windshield resulting in much smoother airflow, better wind protection and a more comfortable ride than any fixed windshield can provide.
What's included in the kit
Our complete drop-in system is custom-made for your bike and includes everything needed to mount and position the shield. Your bike will not require any modification.
- A set of MadStad adjustable brackets
- The acrylic windshield (two styles available, see photos)
- Pair of metal side supports (also available by themselves as an upgrade)
- Aluminum crossbar (standard 7/8" or Touratech 1/2")
The MadStad brackets attach between the bike and the stock shield to give you full control over the windshield height, angle and airflow. This lets you set the shield for your particular height and riding position while pulling lots of air underneath it which is critical for smooth comfortable wind protection. You can use them with any stock or aftermarket shield, or get a complete system with our own windshield designed to provide the smoothest airflow possible.
Size and Color
While the MadStad windshield systems are fully adjustable, we recommend starting with the appropriate shield size relative to rider height.
|RIDER HEIGHT||SHIELD SIZE|
|5'7" to 5'9" (170 - 175 cm)||18" (450 mm)|
|5'10" to 6'0" (178 - 183 cm)||20" (500 mm)|
|6'1" to 6'3" (185 - 191 cm)||22" (500 mm)|
|6'4" and taller (193+ cm)||24" (600 mm)|
HOW TO MEASURE: To know where the top edge of a MadStad windshield is going to be when the brackets are in their lowest position, run a tape measure or ruler straight up from the top edge of the ignition switch (see photo). When sitting on the bike looking straight ahead, estimate where your chin level is, because that's where we want the top of the shield. Whatever that measurement, add 5 inches and that would be the windshield to order. For example, if your chin level is at about the 17 inch level on the tape measure, then order the 22 inch windshield. If your result is an odd number then round to the next even number.
NOTE: Any windshield made for this bike can be used with these MadStad brackets. You don't have to order our windshield, you can get the brackets only, however other manufacturers have not shaped their windshields to optimize airflow with MadStad brackets.See the photos bar for a comparison image of the different colors available.
HOW TO ORDER BRACKETS ONLY:
To purchase the brackets only kit, select "Brackets Only" (STD or Touratech) from the SIZE, COLOR, & STYLE drop down boxes. Then click "Add to Cart."
It will include the same items as the complete kit EXCEPT without the windshield.
Side Supports Upgrade
For those of you who have an original generation of our brackets, we've made the new Side Supports available so you can upgrade your MadStad to the current version. Hardware is included and installation should take just a few minutes without having to remove your MadStad brackets. To order simply select "Side Supports" in each of the three drop-down options lists.
If you are not 100% satisfied with your purchase return it within 30 days. See our return policy details under the FAQ page and buy with confidence.