If you broke a windshield or want a different style or color for your existing Madstad system, this is where to order it. Please note that these windshields work only with Madstad bracket systems and WILL NOT mount to the stock bike equipment (brackets or fairing).
REQUIRES MADSTAD BRACKETS
IMPORTANT: - check with our support team to be sure this style is correct for your Madstad Triumph system
This windshield style was made for the Madstad adjustable shield system for the Triumph Scrambler, Bonneville and others. It does not fit any factory or any other aftermarket systems. No brackets or hardware are included.
If you broke a windshield or want a different style or color for your existing Madstad system, this is where to order it. Please note that these windshields work only with Madstad bracket systems and WILL NOT mount to the stock bike equipment (brackets or fairing).
REQUIRES MADSTAD BRACKETS
IMPORTANT: - check with our support team to be sure this style is correct for your Madstad Triumph system
This windshield style was made for the Madstad adjustable shield system for the Triumph Scrambler, Bonneville and others. It does not fit any factory or any other aftermarket systems. No brackets or hardware are included.
THE MOST COMFORTABLE WIND PROTECTION A MOTORCYCLE CAN HAVE
Customer Reviews
Based on 478 reviews
78%
(371)
12%
(58)
5%
(25)
3%
(14)
2%
(10)
C
I purchased and installed a 24” adjustable shield on my 2014 Honda CTX700N. I thought that I would need a 2nd set of hands to mount it, but it went really easy. I’m glad that I went with the 24” instead of a shorter one.
T
Just installed my new Madstad windshield on my 24 Speedmaster. It has been a long time since riding a bike without a fairing or something to stop the direct wind, grit and bugs from beating me up. I need to play with the adjustments still but it helped a ton. If you're figuring the height do know that the lowest setting would just be tickling the headlight and would go up around 2" from there. A picture I saw showed it off the headlight about an inch when measuring, if I had to do it again I probably would have ordered a 20". The only other thing I ran into was after I mounted the quick release brackets I noticed they were just a touch inside the triple trees which would have made the brackets rub against them and I would have had to use force to slide the shield on. Leaving the brackets securely mounted I placed a crescent wrench with a rag in the jaws, and snugged it on the bracket and rotated it outward gently. It only needed to go about a 1/16 on each side. It worked perfectly and and the shield slid on effortlessly.
D
Installation was easy and the windshield is a great improvement over the stock unit. Very comfortable riding without ear plugs now unless I'll be at sustained highway speeds where no windshield will help with the engine and tire noise, but it sure reduces the buffering on my helmet on the highway.
M
Installed on my Moto Guzzi V85tt. Easy to install and adjust. I went with 24” and will adjust up from the bottom setting probably 1”. Definitely made a difference over the stock Windshield. Only issues is I lost my factory GPS mount. It would be nice if Madstad would come up with a mount for their Windshields.
D
Big upgrade from stock! Thanks! Wondering if I should have some grommets/ threaded around? If they come loose? Thanks
Thank you for leaving your review, Daniel. Glad you're enjoying the upgrade!
For the windshield the side deflectors hardware, so long as the back of the rubber well nut is swollen bigger than the hole when tightening the screws, then you should not have any issues. We recommend only using a hand screwdriver for this. But if you would like spares, we have a hardware pack under Accessories ---- Replacement Parts. It has backup screws, washers and well nuts. Otherwise, please contact us at support@madstad.
Have fun out there!
Madstad Support