Triumph Tiger 800 (2018-up) - Adjustable Windshield System
MadStad Adjustable Windshield System for your Triumph Tiger 800 (2018-2019)
NOTE: CANADIAN & EUROPEAN MODELS MAY REQUIRE OUR 2011 - 2017 SYSTEM - COMPARE YOUR BIKE CAREFULLY TO OUR PHOTOS - IF YOURS HAS THE OLDER INSTRUMENT CLUSTER THIS SYSTEM WILL NOT MOUNT
Transform your ride
Simply the best. Not just a shield, this is a multi-part adjustable airflow system which allows riders to dial in the height and angle of a superior distortion-free windshield resulting in much smoother and more comfortable airflow while still looking over it, not through it. Our shield is quite a bit wider than stock for better wind protection with no hand guard interference. Our side deflectors are farther back and down lower for better blockage of low airflow. Take a look at photos 3 and 4 at left showing you why MadStad systems work like no other.
What's included in the kit
Our complete drop-in system is custom-made for your bike and includes everything needed to mount and position the shield. Your bike will not require any modification.
- Black aluminum base plate and mounting hardware
- A set of MadStad adjustable brackets
- The acrylic windshield
- Pair of acrylic side deflectors with brackets
The MadStad adjustable brackets sit out in front of your instrument cluster on an aluminum base plate. The shield is positioned same as on the factory brackets and our base plate helps to deflect wind up from underneath for dramatically smoother and quieter airflow. Two inches of height and 15 degrees of angle adjustment let you dial in the smoothest airflow while still looking over the top of your shield. The included side deflectors block low and wide air to keep turbulence off your body for a calm cockpit.Here's what two Triumph riders had to say about our first-generation system:
IT. IS. AWESOME. Seriously, the best modification I've ever made, to any bike, ever! And I'm someone who likes to liberally farkle up my bike. - owned approx 30 bikes in the past 20 years. Can truly cruise along with the visor up now - absolutely NO chance of that with the standard / or triumph adventure screen. It is SOOO much quieter on my bike now - it's unbelievable." - t800ben, Bedfordshire, England
"I tried on no less than 6 different screens on my Tiger 800 and finally put back the Madstad on the bike. No other system provided the kind of wind protection and "quiet" as did the Madstad." - Mel T., Petaling Jaya, Malaysia
Size and Color
While the MadStad windshield systems are fully adjustable, we recommend starting with the appropriate shield size relative to rider height.
|RIDER HEIGHT||SHIELD SIZE|
|Up to 5'7" (168 - 173 cm)||18" (45 cm)|
|5'8" to 5'10" (175 - 180 cm)||20" (50 cm)|
|5'11" to 6'1" (183 - 189 cm)||22" (55 cm)|
|6'2" and taller (190+ cm)||24" (60 cm)|
HOW TO MEASURE: Sit on the bike and run a tape measure straight up from the top of the fuel tank to what your estimate your chin level to be, then add 2 or 3 inches. For example, if your chin level appears to be at about 19” above the tank, then the 22” shield is what you should order.
Shield width is 17” at the widest bottom section and the shield in the photos here is a 20" Light Gray tint.
All MadStad windshields are made from 3/16" (4.5 mm) thick cast acrylic and are available in four different tint colors. See photos for comparison image.
If you are not 100% satisfied with your purchase return it within 30 days for a full refund. See our return policy details under the FAQ page and buy with confidence.