Scrambler 1200 (2019-up)
MadStad Quick-Release Adjustable Windshield System for your Triumph Scrambler 1200 (2019-up)
Transform your ride
The tiny factory "touring" shield protects your instrument cluster from the wind, but not much else. Our much larger shields give you full upper body wind protection and our patented adjustable system lets you dial in your best height and angle for much smoother airflow without turbulence or buffeting. Have superior comfort like no other so you can truly enjoy your bike. In addition our quick-release system lets you snap it off and on to go from touring shield to naked bike in just seconds. It's the best of both worlds!
What's included in the kit
Our complete drop-in system is custom-made for your bike and includes everything needed to mount and position the shield. Your bike will not require any modification.
- MadStad fork mount base brackets
- MadStad quick-release adjustable brackets
- The acrylic windshield (22 inch size shown in photos)
Our base brackets bolt to the sides of your forks through two of the four pinch bolts on each side. The adjustable windshield brackets snap on and off of those base brackets without tools and are held in place by spring-loaded latches. Once attached you will be able to set the shield for your particular height and riding position for smooth comfortable wind protection while looking over the shield, not through it! Our brackets are made of heavy-duty stainless steel so you can ride on or off pavement with confidence.
Size and Color
While the MadStad windshield systems are fully adjustable, we recommend starting with the appropriate shield size relative to rider height.
| RIDER HEIGHT | SHIELD SIZE |
|---|---|
| 5'5" to 5'7" (165 - 170 cm) | 18" (45 cm) |
| 5'8" to 5'10" (173 - 178 cm) | 20" (50 cm) |
| 5'11" to 6'1" (180 - 185 cm) | 22" (55 cm) |
| 6'2" and taller (188+ cm) | 24" (61 cm) |
HOW TO MEASURE: Sit on the bike with a tape measure or ruler going straight up from the top center of the fuel tank. Estimate where your mouth level is and add two inches. For example, if your mouth level appears to be at about the 18" level then get the 20 inch windshield. If you are in-between sizes then round down to the shorter size because you can always slide our shield up a couple of inches to compensate.
Another option is to measure up and back from the top of the headlight. (Hold the tape measure back at about the same angle as your forks.) Our windshield sits about 1 inch above the headlight when it its lowest position, so that means the top of our 20 inch shield will be about 21 inches up and back from the top of the headlight. You want the top of our shield to be at about your mouth level as you look straight ahead so that you can see over it when in its lowest position.
All of our Scrambler 1200 shields are 20" wide at their widest point as measured straight across the back. They are made from 3/16" (4.5 mm) thick cast acrylic and are available in four different tint colors. See photos bar for comparison image.
By the way, the wide tail rack in the photos is also a MadStad product and is made to fit the factory tail rack bars with a whole lot more room than the factory option.
Satisfaction Guaranteed
If you are not 100% satisfied with your purchase return it within 30 days. See our return policy details under the FAQ page and buy with confidence.