Gold Wing (2018 -Up)
Complete MadStad Adjustable Windshield System for your Honda Gold Wing (2018 - Up)
Transform your ride
Smoother airflow and better wind protection usually involves more than just a new windshield. Comfort is about superior airflow management and while the Gold Wing's electrically adjustable windshield is helpful, improvement doesn't come until you scoop more airflow under the shield. That's why we don't just make a replacement shield like everyone else, we created a spacer system that actually works to noticeably improve smooth airflow and comfort.
What's included in the kit
Our complete drop-in system is custom-made for your bike and includes everything needed to mount and position the shield. Your bike will not require any modification.
- Solid block spacer system with hardware
- The acrylic windshield
Our spacers are made of weather-resistant machined acetyl copolymer and do not interfere with the movement of the factory height adjustment system. You will be able to replace the factory mounting hole covers so our spacers are hidden behind, preserving the motorcycle's appearance.
Riding is believing
Lifting the shield farther away from the bike pulls more air underneath it which is critical for smoother wind protection. We compared our system to more expensive aftermarket windshields and actually got better comfort with our design. While we usually provide adjustable brackets for height and angle control, it wasn't necessary on this Gold Wing. Our reputation for windshield comfort is second to none but that doesn't mean it has to be expensive.
Size and Color
While the Gold Wing electric system is height adjustable, we recommend starting with the appropriate shield size relative to rider height.
|RIDER HEIGHT||SHIELD SIZE|
|5'7" to 5'9" (170 - 175 cm)||18" (300 mm)|
|5'10" to 6'0" (178 - 183 cm)||20" (350 mm)|
|6'1" and taller (185+ cm)||22" (400 mm)|
These are general recommendations and can vary depending on your inseam, seat height and riding position. We can also accommodate extra short or tall riders by special request.
HOW TO MEASURE: While sitting on the bike run a measuring tape straight up from the top center of the dash. When the factory system is retracted all the way down, the top edge of our 18" shield will be 6 inches (15.2 cm) above that top of the dash, our 20" windshield will be 8 inches (20.3 cm) above that point and so on. You want the top edge of our shield to be at about your mouth level as you look straight ahead, so whichever measurement gives you that position, that is the size shield you would order. This ensures that you can see well over the top of the shield, but can raise it if necessary.
MadStad windshields are made from 3/16" (4.5 mm) thick cast acrylic and are available in four different colors. See photos bar for comparison image.
If you are not 100% satisfied with your purchase return it within 30 days. See our return policy details under the FAQ page and buy with confidence.