Two great products for Triumph Speedmaster (2018 & up) - bundled together for great savings!
Adjustable Windshield System for Triumph Scrambler 1200 (2019 & up)
Our complete drop-in system is custom-made for your bike and includes everything needed to mount and position the shield. Your bike will not require any modification.
- Madstad fork mount base brackets
- Madstad quick-release adjustable brackets
- Acrylic windshield (22 inch size shown in photos)
- All required mounting hardware
Our base brackets bolt to the sides of your forks through two of the four pinch bolts on each side. The adjustable windshield brackets snap on and off of those base brackets without tools and are held in place by spring-loaded latches. Once attached you will be able to set the shield for your particular height and riding position for smooth comfortable wind protection while looking over the shield, not through it! Our brackets are made of heavy-duty stainless steel so you can ride on or off pavement with confidence.
Tail Rack for Triumph Scrambler 1200
--- FOR MODELS WITH STOCK TAIL RACK ---
Attaching gear to the tail of your bike is hard without a wide base that has lots of hook points for bungee cords, and the factory tail rack is quite small. The Madstad tail rack provides much more room with a thick 3/16" aluminum structure, 13 strap holes and 78 hook points for just about anything you are trying to strap down! The top surface is flat so you can set oversized packs on it.
Available in powder coated Black or Raw Aluminum Silver finish.
Two great products for Triumph Speedmaster (2018 & up) - bundled together for great savings!
Adjustable Windshield System for Triumph Scrambler 1200 (2019 & up)
Our complete drop-in system is custom-made for your bike and includes everything needed to mount and position the shield. Your bike will not require any modification.
- Madstad fork mount base brackets
- Madstad quick-release adjustable brackets
- Acrylic windshield (22 inch size shown in photos)
- All required mounting hardware
Our base brackets bolt to the sides of your forks through two of the four pinch bolts on each side. The adjustable windshield brackets snap on and off of those base brackets without tools and are held in place by spring-loaded latches. Once attached you will be able to set the shield for your particular height and riding position for smooth comfortable wind protection while looking over the shield, not through it! Our brackets are made of heavy-duty stainless steel so you can ride on or off pavement with confidence.
Tail Rack for Triumph Scrambler 1200
--- FOR MODELS WITH STOCK TAIL RACK ---
Attaching gear to the tail of your bike is hard without a wide base that has lots of hook points for bungee cords, and the factory tail rack is quite small. The Madstad tail rack provides much more room with a thick 3/16" aluminum structure, 13 strap holes and 78 hook points for just about anything you are trying to strap down! The top surface is flat so you can set oversized packs on it.
Available in powder coated Black or Raw Aluminum Silver finish.
THE MOST COMFORTABLE WIND PROTECTION A MOTORCYCLE CAN HAVE
Customer Reviews
Based on 478 reviews
78%
(371)
12%
(58)
5%
(25)
3%
(14)
2%
(10)
C
I purchased and installed a 24” adjustable shield on my 2014 Honda CTX700N. I thought that I would need a 2nd set of hands to mount it, but it went really easy. I’m glad that I went with the 24” instead of a shorter one.
T
Just installed my new Madstad windshield on my 24 Speedmaster. It has been a long time since riding a bike without a fairing or something to stop the direct wind, grit and bugs from beating me up. I need to play with the adjustments still but it helped a ton. If you're figuring the height do know that the lowest setting would just be tickling the headlight and would go up around 2" from there. A picture I saw showed it off the headlight about an inch when measuring, if I had to do it again I probably would have ordered a 20". The only other thing I ran into was after I mounted the quick release brackets I noticed they were just a touch inside the triple trees which would have made the brackets rub against them and I would have had to use force to slide the shield on. Leaving the brackets securely mounted I placed a crescent wrench with a rag in the jaws, and snugged it on the bracket and rotated it outward gently. It only needed to go about a 1/16 on each side. It worked perfectly and and the shield slid on effortlessly.
D
Installation was easy and the windshield is a great improvement over the stock unit. Very comfortable riding without ear plugs now unless I'll be at sustained highway speeds where no windshield will help with the engine and tire noise, but it sure reduces the buffering on my helmet on the highway.
M
Installed on my Moto Guzzi V85tt. Easy to install and adjust. I went with 24” and will adjust up from the bottom setting probably 1”. Definitely made a difference over the stock Windshield. Only issues is I lost my factory GPS mount. It would be nice if Madstad would come up with a mount for their Windshields.
D
Big upgrade from stock! Thanks! Wondering if I should have some grommets/ threaded around? If they come loose? Thanks
Thank you for leaving your review, Daniel. Glad you're enjoying the upgrade!
For the windshield the side deflectors hardware, so long as the back of the rubber well nut is swollen bigger than the hole when tightening the screws, then you should not have any issues. We recommend only using a hand screwdriver for this. But if you would like spares, we have a hardware pack under Accessories ---- Replacement Parts. It has backup screws, washers and well nuts. Otherwise, please contact us at support@madstad.
Have fun out there!
Madstad Support