madstad-windsheild-slider-1 madstad-windsheild-slider-1 KTM 790/890/R 3-in-1 Madstad Bundle

Currency

Three great products for KTM 790 / 890 Adventure / R (2019 - 2022) - bundled together for great savings! 

Adjustable Windshield System for KTM 890 / 790 Adventure / R (2019 - 2022)

Our complete drop-in system is custom-made for your bike and includes:  

  • Adjustable bracket system

  • Acrylic windshield (18" in photo)

  • Installation hardware

  • All required mounting hardware 

Your bike will not require any modification and our system does not interfere with any factory accessories. You will not be able to use your stock shield, it is not compatible with the Madstad system and is too small to provide proper wind protection. We've created a wider shield to give you better wind protection around your body but without getting in the way of your hand guards at full lock. Our bracket system attaches where the factory shield mounts and allows you to dial in the best height and angle to give you smooth airflow over your helmet while still allowing you to see over the top of the shield.

All Madstad windshields are made from 3/16" (4.5 mm) thick cast acrylic.

Kickstand Shoe for KTM 790 Adventure
 
This aluminum kickstand shoe and extension helps prevent tip-overs and sinking into soft ground. It is much wider than the factory kickstand bottom but particularly extends outward to give your bike great support against tip-overs. It fully clears the body when in the up position and has a textured bottom surface for extra grip. The base is aluminum and has a drain hole in the main cavity. The top plate and screws are stainless steel and an installation wrench is included. This shoe is a very tight fit and won't budge once installed. Every KTM 790 should have one.  Made in the USA.

Tail Rack for KTM 390 / 790 / 890 Adventure and Adventure R (2020 - 2022)

Rack Dimensions: Top surface area: 15" at widest, 12.5" at narrowest.

Attaching gear to the tail of your bike is hard without a wide base that has lots of hook points for bungee cords. The MadStad tail rack provides just that with a thick 3/16" aluminum structure, 13 strap holes and 78 hook points for just about anything you are trying to strap down! Our tail rack attaches either on top of the factory plate and grab handles, or in place of the factory plastic in case those grab handles are in the way. Hardware is included for both configurations and the top surface is flat so you can set oversized packs on it. Every KTM 790 Adventure should have one! Made in the USA.

Available in powder coated Black or Raw Aluminum Silver finish.


Availability
 
Sale

KTM Bundle for 790 / 890 Adventure / R (2019 - 2022)

Regular price $504.85 $479.60 5% off
Unit price
per
Buy With Confidence
Check FAQ For Current Fulfillment Times

All products are custom made at the time of your order. Please see FAQs for current production times.

(0 in cart)

Three great products for KTM 790 / 890 Adventure / R (2019 - 2022) - bundled together for great savings! 

Adjustable Windshield System for KTM 890 / 790 Adventure / R (2019 - 2022)

Our complete drop-in system is custom-made for your bike and includes:  

  • Adjustable bracket system

  • Acrylic windshield (18" in photo)

  • Installation hardware

  • All required mounting hardware 

Your bike will not require any modification and our system does not interfere with any factory accessories. You will not be able to use your stock shield, it is not compatible with the Madstad system and is too small to provide proper wind protection. We've created a wider shield to give you better wind protection around your body but without getting in the way of your hand guards at full lock. Our bracket system attaches where the factory shield mounts and allows you to dial in the best height and angle to give you smooth airflow over your helmet while still allowing you to see over the top of the shield.

All Madstad windshields are made from 3/16" (4.5 mm) thick cast acrylic.

Kickstand Shoe for KTM 790 Adventure
 
This aluminum kickstand shoe and extension helps prevent tip-overs and sinking into soft ground. It is much wider than the factory kickstand bottom but particularly extends outward to give your bike great support against tip-overs. It fully clears the body when in the up position and has a textured bottom surface for extra grip. The base is aluminum and has a drain hole in the main cavity. The top plate and screws are stainless steel and an installation wrench is included. This shoe is a very tight fit and won't budge once installed. Every KTM 790 should have one.  Made in the USA.

Tail Rack for KTM 390 / 790 / 890 Adventure and Adventure R (2020 - 2022)

Rack Dimensions: Top surface area: 15" at widest, 12.5" at narrowest.

Attaching gear to the tail of your bike is hard without a wide base that has lots of hook points for bungee cords. The MadStad tail rack provides just that with a thick 3/16" aluminum structure, 13 strap holes and 78 hook points for just about anything you are trying to strap down! Our tail rack attaches either on top of the factory plate and grab handles, or in place of the factory plastic in case those grab handles are in the way. Hardware is included for both configurations and the top surface is flat so you can set oversized packs on it. Every KTM 790 Adventure should have one! Made in the USA.

Available in powder coated Black or Raw Aluminum Silver finish.


THE MOST COMFORTABLE WIND PROTECTION A MOTORCYCLE CAN HAVE

Customer Reviews

Based on 400 reviews
79%
(317)
12%
(47)
4%
(16)
3%
(11)
2%
(9)
K
Kevin Tisdall
Tener 700 18"

Just got it. Came we mounting screws but that was quickly remedied. Good support, very solid product. I have not ridden it yet but had one years ago on a vstrom and I expect it will be great.

M
Matthew
Excellent product!

Fit and finish are top notch, very happy with the purchase!

J
Josh H.
Awful Experience due to no hardware

I bought this as part of the modular system for the 2009 rocket 3. The main screen and fly screen were perfect and installed. The lower deflectors though. They are missing the hardware to secure the screen to the mounting bracket and for the mounting bracket to connect to the main assembly. (The packaging had random hardware). Contacted support on 12/20/24. They needed pictures. I sent them. They didn't sent me anything else. Opened a new help ticket through email and they stated the previous ticket was still open and that they were sending me hardware. It is now 1/10/25 and I still have nothing for the lower deflectors. At this point they should offer me a refund on the lower deflector if they can't get me the hardware.

J
Josh H.
Exceptional

Easy to install with simple tools. Fits well and blocks the wind. Probably took 30 minutes in total to install.

C
Chad Johnson
One word says it all ... Awesome!!! Super happy with my windshield

I highly recommend this windshield & the staff is top notch