Madstad Adjustable Windshield System for BMW K1200S (2005-2008)
Transform your ride
Madstad's patented mounting system allows riders to adjust the height and angle of their motorcycle windshield resulting in much smoother airflow, better wind protection and a far more comfortable ride than any fixed windshield can provide.
What's included
Our complete drop-in system is custom-made for your bike and includes everything needed to mount and position the shield. Your bike will not require any modification.
- Black aluminum base plate (replaces the stock windshield)
- A set of Madstad adjustable brackets
- Acrylic windshield
- All required mounting hardware
The base plate slides into the fairing in place of the factory windshield, and our adjustable brackets bolt to this base. The new windshield attaches to these brackets and floats out in front of your fairing. With the shield separated from the fairing you are pulling lots of air underneath it which is critical for smooth comfortable wind protection. You can also dial it in for the optimum height, angle and airflow so that you can ride at highway speeds in total comfort looking over the top of the shield, even with your visor open and plain glasses on.
All Madstad windshields are made from 3/16" (4.5 mm) thick cast acrylic.
Riding is believing
With the windshield separated from the bike riders now have control over the height and angle of the shield to eliminate the vacuum that is the primary cause of most turbulence. The result? Smooth airflow placed exactly where it’s desired. You can actually get better wind protection with our smaller adjustable shield and look over it rather than through it while comfortably enjoying an open view of the road, at any speed.
Colors & sizing
All our windshields come in three color options (clear, medium gray and dark gray), as well as multiple sizes. Here are our best guidelines for measuring to find your optimal windshield size:
How to measure video: https://youtu.be/biFx4_vVGG4
1) Review provided photo to determine the measuring point on the bike.
2) Measure up from the measuring point, maintaining the angle of the forks (two wheeled vehicles, 55-60 degrees for other models).
3) Select the windshield size that will be aligned to mouth level.
All of our adjustable brackets have at least 2" of up down range to fine tune the fit and about 15 degrees of angle adjustment used to dial in clean air.
Returns & exchanges
See our return/exchange policy details under FAQs, and buy with confidence.
Madstad Adjustable Windshield System for BMW K1200S (2005-2008)
Transform your ride
Madstad's patented mounting system allows riders to adjust the height and angle of their motorcycle windshield resulting in much smoother airflow, better wind protection and a far more comfortable ride than any fixed windshield can provide.
What's included
Our complete drop-in system is custom-made for your bike and includes everything needed to mount and position the shield. Your bike will not require any modification.
- Black aluminum base plate (replaces the stock windshield)
- A set of Madstad adjustable brackets
- Acrylic windshield
- All required mounting hardware
The base plate slides into the fairing in place of the factory windshield, and our adjustable brackets bolt to this base. The new windshield attaches to these brackets and floats out in front of your fairing. With the shield separated from the fairing you are pulling lots of air underneath it which is critical for smooth comfortable wind protection. You can also dial it in for the optimum height, angle and airflow so that you can ride at highway speeds in total comfort looking over the top of the shield, even with your visor open and plain glasses on.
All Madstad windshields are made from 3/16" (4.5 mm) thick cast acrylic.
Riding is believing
With the windshield separated from the bike riders now have control over the height and angle of the shield to eliminate the vacuum that is the primary cause of most turbulence. The result? Smooth airflow placed exactly where it’s desired. You can actually get better wind protection with our smaller adjustable shield and look over it rather than through it while comfortably enjoying an open view of the road, at any speed.
Colors & sizing
All our windshields come in three color options (clear, medium gray and dark gray), as well as multiple sizes. Here are our best guidelines for measuring to find your optimal windshield size:
How to measure video: https://youtu.be/biFx4_vVGG4
1) Review provided photo to determine the measuring point on the bike.
2) Measure up from the measuring point, maintaining the angle of the forks (two wheeled vehicles, 55-60 degrees for other models).
3) Select the windshield size that will be aligned to mouth level.
All of our adjustable brackets have at least 2" of up down range to fine tune the fit and about 15 degrees of angle adjustment used to dial in clean air.
Returns & exchanges
See our return/exchange policy details under FAQs, and buy with confidence.
THE MOST COMFORTABLE WIND PROTECTION A MOTORCYCLE CAN HAVE
Customer Reviews
Based on 495 reviews
78%
(384)
12%
(60)
5%
(26)
3%
(15)
2%
(10)
V
I recently purchased a, new to me 2019 Yamaha Tracer 900. It came with the stock windshield, which is a low windshield, allowing the helmet to take the full brunt of the wind. I wrote it like this for a couple weeks while my Madstad was in the works. The last full height windshield was a GIVI that I had on a Vstrom. The Madstad outperforms the other guy hands down. I’m impressed, good work guys.
D
Took longer than I had hoped to receive my screen. Approximately one month. But it was worth the wait. Very well made and good looking product. And the quick release feature is very useful.
A
Installation was easy, adjustment were also easy - however, I was rather disappointed with the performance! I ordered the tallest windshield available for Royal Enfield Interceptor 650 - 22 inch. the height was fine and I was able to push the wind over my head - however whatever adjustments I made, I was not able to remove wind buffeting from the sides! At 50 mph and above, the wind was hitting the sides of my helmet creating terrible noise and shaking my head.
The windshield is not wide enough to effectively protect me! If it haven't been installed, I would return it, but now I am just down 300+ dollars for the product I cannot use.
T
Well designed windshield and mounting hardware. Windshield was easy to install and feels very secure at highway speeds.
The Center air deflector however, drags across the top of the tank after installation on Honda CTX700N. Solution follows.
Go to Lowe's and purchase the following items:
1. TV Mounting Screw Kit ($6.98)
2. Flat and Lock Washer Assortment ($5.48)
Assemble the plastic washers on either side of the deflector and insert the long bolt in the original holes on the windshield bracket as shown below.
When trying to remove the nuts that were embedded in the deflector, the ears broke off. I did not have a jig saw, so purchased the Craftsman corded jig saw ($67.17) and 2 blades. (It did come with one blade in the box.)
Next, I measured across the handlebar opening and made two vertical cuts and two horizontal cuts to join up with the vertical. (6 1/8" x 1 3/8")
Cut part way into the vertical marks, then start from the sides and curve the horizontal cuts into the vertical.
Next, drill the holes in the deflector to match the holes in the windshield mounting bracket. Sandwich the deflector between the plastic pieces from the TV Mounting kit and mount to the bracket using the original holes.
This solution works surprisingly well, stopping most of the wind that rushes up between the forks and into your face. Hope this helps some of you.
We appreciate you leaving your review. We're glad that the installation was easy and that you find the unit secure.
Regarding the center deflector, likely yours was sent not bent enough at the original tabs. Normally there are no issues with clearing the fuel tank. We apologize for the inconvenience, and we'll be shipping you out a replacement deflector.
Thank you,
Madstad Support Team
A
Sorry this is so late, been riding,,, I have been running a Madstad original Road Glide shield on top of the Clearview replacement for my ACE Tourer factory shield since about 2011 or so iirc. It works! I did have to remove the fork lowers and add deflectors to the engine guard instead, forcing air up into the area behind the factory shield. This combo works great. 70 in an open-face helmet feels like 35 used to and I do look over it. I have Madstad shields on my other two bikes also.
