Complete MadStad Adjustable Windshield System for your KTM 790 Adventure / R (2019-Up)
Transform your ride
MadStad's patented mounting system allows riders to adjust the height and angle of their windshield resulting in much smoother airflow, better wind protection and a more comfortable ride than any fixed windshield can provide.
What's included in the kit
Our complete drop-in system is custom-made for your bike and includes:
- Adjustable bracket system
- The acrylic windshield (an 18" Light Gray shown)
- Installation hardware
Your bike will not require any modification and our system does not interfere with any factory accessories. You will not be able to use your stock shield, it is not compatible with the MadStad system and is too small to provide proper wind protection.
We've created a wider shield to give you better wind protection around your body but without getting in the way of your hand guards at full lock. Our bracket system attaches where the factory shield mounts and allows you to dial in the best height and angle to give you smooth airflow over your helmet while still allowing you to see over the top of the shield.
Riding is believing
With the windshield separated from the fairing and control over the height and angle of the shield, you can finally eliminate the vacuum that is the primary cause of most turbulence. The result? Smooth airflow placed exactly where it’s desired. Our customers have discovered that they can actually get better wind protection with our smaller adjustable shield rather than a larger fixed one.
Size and Color
While the MadStad windshield systems are fully adjustable, we recommend starting with the appropriate shield size relative to rider height. These are general recommendations and can vary depending on your inseam, seat height and riding position. We can also accommodate extra short or tall riders by special request.
|RIDER HEIGHT||SHIELD SIZE|
|5'6" to 5'8" (168 - 173 cm)||18" (46 cm)|
|5'9" to 5'11" (175 - 180 cm)||20" (51 cm)|
|6'0" to 6'2" (183 - 188 cm)||22" (56 cm)|
|6'3" and taller (191+ cm)||24" (61 cm)|
HOW TO MEASURE: Sit on the bike and with a tape measure or ruler measure straight up from the top of the instrument panel. Look straight ahead and estimate about where your chin or mouth level is. Add 7 inches and that will be the top edge of our windshield in its lowest position. For example, if you estimate your chin/mouth level is at about the 13" up from the top of the instrument panel, then that is where the top edge of our 20" windshield will be when in its lowest position, and that would be the windshield size you would choose. Our brackets will allow you to go up about 2 more inches from there, however we want to make sure you are looking over the top at the lowest bracket level. If you measured in-between our shield sizes we would most likely recommend rounding up to the next size, so long as you can still see over it.
All MadStad windshields are made from 3/16" (4.5 mm) thick cast acrylic and are available in four different tint colors. See photos bar for comparison image.
If you are not 100% satisfied with your purchase return it within 30 days. See our return policy details under the FAQ page and buy with confidence.