Three great products for the Harley-Davidson Pan America - bundled together for great savings!
Note: These are all compatible with each other. The Display Riser and GPS/Phone Mount require the Adjustable Windshield System.
Adjustable Windshield System
Our new system is so well integrated with the bike, you will think it came from the factory that way. It is one of our most involved bracket kits (see photos) because it bolts to the steel frame and holds the instrument panel as well as the windshield. When installed, you can actually pull your bike around by the windshield, but our patented mechanism still lets you easily adjust height and angle without tools. Only a few simple hand tools are needed to install, and you will NOT need to modify the bike in any way. This kit includes:
- The Madstad adjustable frame-mount bracket system
- Acrylic touring windshield
- All required mounting hardware
Installation Video:
Display Riser
This add-on accessory pairs with Madstad adjustable windshield system allowing for improved visibility by raising the instrument display higher and solves the problem of the low factory display position. With a much greater tilt range, you can pivot the display back to standing angle for the most direct and clear view possible under all of your riding positions.
• Raises instrument display 2 full inches, allowing a clear line of sight to safely view the road ahead AND your display screen
• Ideal when using a tank bag or handlebar risers
• Easy installation to the Madstad adjustable windshield system
• Includes plug & play display wiring harness extension
• Powder coated stainless steel components
• Will not work with OEM windshield
• Made in the USA
Phone Mount Crossbar
This add-on accessory for the Madstad adjustable windshield system allows you to attach your phone where it MUCH easier to see, just below your line of sight. Instead of bobbing your head up and down to see your smartphone screen, you simply lower your gaze a few inches and there it is. Keep your eyes on the road, and your critical information front and center.
Note: Phone mount in photo not included.
The stainless steel bar brackets mount directly to the metal Madstad windshield system so you get the most solid mounting possible. The bar itself is solid 7/8" thick aluminum and will not rotate so that whatever you mount there stays in place. Mount up to two devices side-by-side, and you can use this crossbar whether or not you have purchased our Display Riser Kit.
Three great products for the Harley-Davidson Pan America - bundled together for great savings!
Note: These are all compatible with each other. The Display Riser and GPS/Phone Mount require the Adjustable Windshield System.
Adjustable Windshield System
Our new system is so well integrated with the bike, you will think it came from the factory that way. It is one of our most involved bracket kits (see photos) because it bolts to the steel frame and holds the instrument panel as well as the windshield. When installed, you can actually pull your bike around by the windshield, but our patented mechanism still lets you easily adjust height and angle without tools. Only a few simple hand tools are needed to install, and you will NOT need to modify the bike in any way. This kit includes:
- The Madstad adjustable frame-mount bracket system
- Acrylic touring windshield
- All required mounting hardware
Installation Video:
Display Riser
This add-on accessory pairs with Madstad adjustable windshield system allowing for improved visibility by raising the instrument display higher and solves the problem of the low factory display position. With a much greater tilt range, you can pivot the display back to standing angle for the most direct and clear view possible under all of your riding positions.
• Raises instrument display 2 full inches, allowing a clear line of sight to safely view the road ahead AND your display screen
• Ideal when using a tank bag or handlebar risers
• Easy installation to the Madstad adjustable windshield system
• Includes plug & play display wiring harness extension
• Powder coated stainless steel components
• Will not work with OEM windshield
• Made in the USA
Phone Mount Crossbar
This add-on accessory for the Madstad adjustable windshield system allows you to attach your phone where it MUCH easier to see, just below your line of sight. Instead of bobbing your head up and down to see your smartphone screen, you simply lower your gaze a few inches and there it is. Keep your eyes on the road, and your critical information front and center.
Note: Phone mount in photo not included.
The stainless steel bar brackets mount directly to the metal Madstad windshield system so you get the most solid mounting possible. The bar itself is solid 7/8" thick aluminum and will not rotate so that whatever you mount there stays in place. Mount up to two devices side-by-side, and you can use this crossbar whether or not you have purchased our Display Riser Kit.
THE MOST COMFORTABLE WIND PROTECTION A MOTORCYCLE CAN HAVE
Customer Reviews
Based on 384 reviews
80%
(307)
12%
(45)
4%
(15)
3%
(10)
2%
(7)
N
The windshield fixed my wind buffetting issues! I'm riding comfortably :) It looks good and functions great. The only knock I would give is poor instructions. I had to do a little head scratching but was able to figure out I needed to completely disassemble the brackets to get them in the correct alignment for installation (which the instructions suggest not to do - wasn't going to work the way it came!).
Overall - satisfied. If I need another windshield I'll come to MadStad. Thanks !
Thanks for leaving your review Neal. Awesome to hear the Madstad solved your buffetting and you're finding a comfortable airflow. We also appreciate you figuring out the brackets for installation and apologize the instructions were not super helpful. We'll add some clarity to the manual. If you still have any questions or need anything, we're at support@madstad.com.
Ride On,
Madstad Support
d
The Harley Panamerica certainly has it's faults but with the Madstad winshield buffeting and wind noise on the highway are not among them. The Pan is a great stable highway bike and the relative calm the Madstad provides makes me want to ride more. I am very sensitive to buffeting and this is probably the best protection outside of a full touring bike. I am 6 feet tall with a 32 inch inseam with the seat in the high position. The 20 inch shield was not quite tall enough so ordered the 22 inch. I got the whole package of shield, display riser and gps bar. Not cheap but love all of it. My only complaint is that printed instructions in color should be included. I have noticed other companies are going cheap and relying on online instructions and making you print them out. Not acceptable! Also installing all three products at once requires diverging slightly from the directions for installing each product seperatly. I eventually figured it out with help from Madstad but they need to include printed directions for installing all three at once. With that said, spend the money and buy the package. Quality stuff as always.
We appreciate you for taking the time to leave this review, Douglas. We're very glad that you're able to dial in clean airflow and that you find the quality is to your standards. We also appreciate and understand the feedback regarding instructions.
Thank you - Madstad Support Team
M
This is a very nice system and I think it's the best for this bike. Easy install and adjustable up-down -tilt to get it just right. Also quickly removable.
R
Good shield, it works well, but it's a bit wobbly. Cross bracing would do it wonders, thankfully, I'm an engineer/fabricator and will fab something up.
Thanks for leaving your review Robbie. We're super glad to know it's working well for you.
Naturally there will be some movement with wind forces, but this should not be excessive. As a suggestion, take a second look at the knobs. They can take a moment to get used to. If the coned portion of the knob is not fully seated into the scalloped portion of the upper bracket, then there can be some undesired play. This can happen despite the knobs appearing tight.
If this is the case, the solution is to back the knobs off a bit and then lightly wiggle the windshield while tightening the knobs. This will help them fall correctly into the brackets.
Please contact us at support@madstad.com if you are unable to resolve the movement.
J
Fitment instructions could have been a bit better or at least better illustrated. The screen itself wasn't hard to install but the detachable brackets were a bit confusing how they worked. A bit of trial and error solved the riddle. As far as the wind protection it's near perfect. At highway speeds the wind pressure is negligible on my chest and there is no helmet buffeting at all. On some screens the redirection of air pressure sometimes gets shifted to the helmet and there is a fiddling period to optimize the result. This unit bolts up and works fantastic as is. It has to since no adjustability is available, or needed. While it might seem that 5 stars isn't warranted based on my mechanical aptitude the fact that it's a brilliant piece of kit makes up for my shortcomings.
Thanks for leaving your review John. We appreciate the feedback regarding the instructions and will see what we can do to improve them. Glad that you were able to get familiar with the height and angle adjusters and were able to find a smoother airflow setting. Looks like you did a nice job of installing, thanks for the photos. Enjoy and we're here if you need any support down the road.
Madstad Support