TackForm Black Can-Am Phone Cradle | Spyder Center Riser Mount - M10 Bolt | 3.5" DuraLock™ Arm
*This product is excluded from any Madstad sales and promotions.
Compatible With:
Can-Am Spyder F3 (All Models)Can-Am Spyder RS Models (2013 and newer only)
Can-Am Spyder ST without Tri-Axis Handlebars
Can-Am Spyder RT without Tri-Axis Handlebars
Please Note:
*The 20MAXX and 20MAXX VIBE phone cradles are part of our "MAXX" series and offer Heavy-Duty spring tension. This level of tension is specifically engineered for Motorcycle, Extreme Off-Road, SXS, ATV, Open Top Driving, and other demanding applications.
- Spyder Handlebar Center Riser Mount: Our innovative Spyder Riser Mount allows you the ability to mount either a 20mm ball or dovetail to your existing 10mm (M10) Riser bolt location. Using our high-strength Type-B plate and extended length M10 bolt (Included), you can easily mount various holders such as a Phone Cradle, Drink Holder, GPS, or Action Camera onto the ball or dovetail.
- Universal Phone Compatibility: Our phone holder is designed to seamlessly work with nearly all smartphone models, cases, and sizes. While you're on the go, it ensures a secure fit for any device, whether or not it's in a case. Capable of securely holding devices up to 3.7" wide and 0.6" thick. Please check your device for proper fitment.
- (Optional) Vibration Dampening Phone Holder: ATV/SXS vibrations have been known to adversely affect the image stabilization mechanism in some new smartphones. Our Enduro 20MAXX VIBE cradle reduces high frequency vibrations transferred from your ATV/SXS to your phone, reducing the chance of damaging your camera.
- Innovative Cradle Design: Experience the difference with our specially designed cradle. Unlike standard spring cradles, our octagon-shaped grips minimize heat transfer by pulling the phone away from the cradle's back on hot days. The spring mechanism is perfectly calibrated, allowing for effortless single-handed insertion & removal of mobile device without straining the mount base.
- Clip-In Grips: Traditionally, our previous generation phone cradle utilized double-sided 3M tape to secure the grips onto the cradle, a method commonly employed by other brands with similar-looking holders. However, in high temperatures, the double-sided tape could loosen, causing the grips to peel away. Our Clip-In Grips address this issue.
- Cradle Pin Sleeves Eliminate Cradle Buzz: Cradle buzz is a common issue in many of our competitors' current products. These metal cradles feature steel pins that run through them to support internal compression springs. However, the metal-on-metal contact, combined with vibrations from vehicles or motorcycles, can result in an irritating buzzing sound. We've eliminated this problem in our Enduro cradles by 'sleeving' the pins, ensuring quiet operation.
- Premium Materials: Real CNC Machined Black Anodized Aluminum. Glass Filled Resin Knob Molded over Stainless steel threaded inserts. Stainless Steel and Aluminum Internal supports.
- Optional Anti-Theft Knob: (PATENT PENDING) This arm, although not always necessary, has optional anti-theft features. This can (A) help prevent snatch and grab situations on your motorcycle, SXS, or other similar environments. (B) The ball cannot slip from the socket if properly tightened.
- Color Swap Compatible: Tackform offers a wide range of anodized billet aluminum knobs. This DuraLock arm is compatible with Tackform's DuraLock knobs, allowing you to customize your setup to match your vehicle. Black knob included.
- Tackform 20 Series: Specifically designed for compatibility with Tackform’s 20 Series Platform, revolving around the 20mm ball and socket system. While compatible with other 20mm products, our parts stand out for their tested durability and engineered load capacities, featuring a safety factor not guaranteed by other manufacturers. Please Note: Not suitable for 25.4mm / 1” / B-Sized balls.
MONEY BACK GUARANTEE (offered by TackForm)
If the product you purchased does not meet or exceed your expectations you can return it within 30 days no questions asked. Please note that shipping costs are non-refundable. Contact Madstad PRIOR to returning for details.
TackForm Black Can-Am Phone Cradle | Spyder Center Riser Mount - M10 Bolt | 3.5" DuraLock™ Arm
*This product is excluded from any Madstad sales and promotions.
Compatible With:
Can-Am Spyder F3 (All Models)Can-Am Spyder RS Models (2013 and newer only)
Can-Am Spyder ST without Tri-Axis Handlebars
Can-Am Spyder RT without Tri-Axis Handlebars
Please Note:
*The 20MAXX and 20MAXX VIBE phone cradles are part of our "MAXX" series and offer Heavy-Duty spring tension. This level of tension is specifically engineered for Motorcycle, Extreme Off-Road, SXS, ATV, Open Top Driving, and other demanding applications.
- Spyder Handlebar Center Riser Mount: Our innovative Spyder Riser Mount allows you the ability to mount either a 20mm ball or dovetail to your existing 10mm (M10) Riser bolt location. Using our high-strength Type-B plate and extended length M10 bolt (Included), you can easily mount various holders such as a Phone Cradle, Drink Holder, GPS, or Action Camera onto the ball or dovetail.
- Universal Phone Compatibility: Our phone holder is designed to seamlessly work with nearly all smartphone models, cases, and sizes. While you're on the go, it ensures a secure fit for any device, whether or not it's in a case. Capable of securely holding devices up to 3.7" wide and 0.6" thick. Please check your device for proper fitment.
- (Optional) Vibration Dampening Phone Holder: ATV/SXS vibrations have been known to adversely affect the image stabilization mechanism in some new smartphones. Our Enduro 20MAXX VIBE cradle reduces high frequency vibrations transferred from your ATV/SXS to your phone, reducing the chance of damaging your camera.
- Innovative Cradle Design: Experience the difference with our specially designed cradle. Unlike standard spring cradles, our octagon-shaped grips minimize heat transfer by pulling the phone away from the cradle's back on hot days. The spring mechanism is perfectly calibrated, allowing for effortless single-handed insertion & removal of mobile device without straining the mount base.
- Clip-In Grips: Traditionally, our previous generation phone cradle utilized double-sided 3M tape to secure the grips onto the cradle, a method commonly employed by other brands with similar-looking holders. However, in high temperatures, the double-sided tape could loosen, causing the grips to peel away. Our Clip-In Grips address this issue.
- Cradle Pin Sleeves Eliminate Cradle Buzz: Cradle buzz is a common issue in many of our competitors' current products. These metal cradles feature steel pins that run through them to support internal compression springs. However, the metal-on-metal contact, combined with vibrations from vehicles or motorcycles, can result in an irritating buzzing sound. We've eliminated this problem in our Enduro cradles by 'sleeving' the pins, ensuring quiet operation.
- Premium Materials: Real CNC Machined Black Anodized Aluminum. Glass Filled Resin Knob Molded over Stainless steel threaded inserts. Stainless Steel and Aluminum Internal supports.
- Optional Anti-Theft Knob: (PATENT PENDING) This arm, although not always necessary, has optional anti-theft features. This can (A) help prevent snatch and grab situations on your motorcycle, SXS, or other similar environments. (B) The ball cannot slip from the socket if properly tightened.
- Color Swap Compatible: Tackform offers a wide range of anodized billet aluminum knobs. This DuraLock arm is compatible with Tackform's DuraLock knobs, allowing you to customize your setup to match your vehicle. Black knob included.
- Tackform 20 Series: Specifically designed for compatibility with Tackform’s 20 Series Platform, revolving around the 20mm ball and socket system. While compatible with other 20mm products, our parts stand out for their tested durability and engineered load capacities, featuring a safety factor not guaranteed by other manufacturers. Please Note: Not suitable for 25.4mm / 1” / B-Sized balls.
MONEY BACK GUARANTEE (offered by TackForm)
If the product you purchased does not meet or exceed your expectations you can return it within 30 days no questions asked. Please note that shipping costs are non-refundable. Contact Madstad PRIOR to returning for details.
